Updated Nov 11, 2026· 10 min read

Our Top Picks

  1. Digital Infrared Thermometer gun for cookingHandhold
    Check on Amazon
  2. Etekcity Infrared Thermometer Laser Temperature Gun 774-58°F to 842°F0.25 pounds
    Check on Amazon
  3. TempPro TempScan Infrared Thermometer Gun for Pizza Oven1 Laser0.3 pounds
    Check on Amazon
  4. Klein Tools IR1 Infrared Thermometer with Targeting Laser10:1 IR Thermometer6.01 x 4.14 x 1.73 inches0.2 pounds
    Check on Amazon
  5. TempPro TempScan 2-in-1 Infrared Thermometer Gun with MeatIR Thermometer with Meat Probe
    Check on Amazon
  6. Etekcity Infrared Thermometer Laser Temperature GunStandard6.1 x 3.1 x 1.57 inches0.4 pounds
    Check on Amazon

An infrared thermometer gun is a surface-temperature tool, and that single fact is where most buying mistakes start. It reads the skin of a pizza stone, a griddle, a duct register, or an engine block from a distance, but it cannot see inside a roast and it is not a fever thermometer. With a ceiling of under 150 dollars, every model below is affordable; the real decision is whether you need a high maximum temperature for a pizza oven, adjustable emissivity for shiny pans, or a probe for internal doneness.

This guide serves home cooks with grills and ovens, hobbyists who service HVAC vents or engines, and people with reptile enclosures or candy-making setups. In 2026 the category is crowded with near-identical guns, so the comparison below leans on what each title actually states: temperature range, emissivity control, MAX or MIN hold, laser targeting, and probe options. Eight distinct models are covered.

Quick Picks

Digital Infrared Thermometer gun for cooking,BBQ,Pizza oven,Ir Thermometer with Backlight,-58℉~932℉(-50℃~500℃) Handheld Non Contact Heat Laser Temperature Gun (Not for Human)

Digital Infrared Thermometer gun for cooking,BBQ,Pizza oven,Ir Thermometer with Backlight,-58℉~932℉(-50℃~500℃) Handheld Non Contact Heat Laser Temperature Gun (Not for Human)

One of the consumer electronics options compared in this guide.

View on Amazon

Etekcity Infrared Thermometer Laser Temperature Gun 774 | Cooking, Pizza Oven, Griddle, BBQ, Meat, HVAC, Engine, Adjustable Emissivity, MAX Display, Surface Measurement

Etekcity Infrared Thermometer Laser Temperature Gun 774 | Cooking, Pizza Oven, Griddle, BBQ, Meat, HVAC, Engine, Adjustable Emissivity, MAX Display, Surface Measurement

One of the consumer electronics options compared in this guide.

View on Amazon

TempPro TempScan Infrared Thermometer Gun for Pizza Oven Griddle HVAC | Temperature Gun with Adjustable Emissivity, Infrared Thermometer for Cooking BBQ Meat Engine, Temp Gun with -58~1022°F

TempPro TempScan Infrared Thermometer Gun for Pizza Oven Griddle HVAC | Temperature Gun with Adjustable Emissivity, Infrared Thermometer for Cooking BBQ Meat Engine, Temp Gun with -58~1022°F

One of the consumer electronics options compared in this guide.

View on Amazon

Klein Tools IR1 Infrared Thermometer with Targeting Laser, Auto-Hold, More | Digital Laser Gun is Non-Contact Thermometer with a Temperature Range -4 to 752-Degree Fahrenheit, Optical Resolution 10:1

Klein Tools IR1 Infrared Thermometer with Targeting Laser, Auto-Hold, More | Digital Laser Gun is Non-Contact Thermometer with a Temperature Range -4 to 752-Degree Fahrenheit, Optical Resolution 10:1

One of the consumer electronics options compared in this guide.

View on Amazon

TempPro TempScan 2-in-1 Infrared Thermometer Gun with Meat Probe | Instant Read Thermometer for Grilling, Non-Contact Infrared Thermometer for Cooking Pizza Oven Griddle HVAC Pool AC Vent

TempPro TempScan 2-in-1 Infrared Thermometer Gun with Meat Probe | Instant Read Thermometer for Grilling, Non-Contact Infrared Thermometer for Cooking Pizza Oven Griddle HVAC Pool AC Vent

One of the consumer electronics options compared in this guide.

View on Amazon

Etekcity Infrared Thermometer Laser Temperature Gun, -58°F~1130°F | Cooking, Pizza Oven, BBQ, Meat, Kitchen, Reptile, HVAC, Adjustable Emissivity, MAX Display, High Temperature

Etekcity Infrared Thermometer Laser Temperature Gun, -58°F~1130°F | Cooking, Pizza Oven, BBQ, Meat, Kitchen, Reptile, HVAC, Adjustable Emissivity, MAX Display, High Temperature

One of the consumer electronics options compared in this guide.

View on Amazon

Digital Infrared Thermometer Gun for Cooking,-58 to 1112 °F Laser Temperature Gun with Adjustable Emissivity&MAX&MIN,IR Thermometer for Pizza,Oven,Grill,Kitchen,BBQ,Meat,Food,Griddle (not for Human)

Digital Infrared Thermometer Gun for Cooking,-58 to 1112 °F Laser Temperature Gun with Adjustable Emissivity&MAX&MIN,IR Thermometer for Pizza,Oven,Grill,Kitchen,BBQ,Meat,Food,Griddle (not for Human)

One of the consumer electronics options compared in this guide.

View on Amazon

Infrared Thermometer Laser Temperature Gun, Adjustable Emissivity | Digital infrared temp gun for Engine, BBQ, Pizza, oven, candy, grilling, baking, HVAC, automotive

Infrared Thermometer Laser Temperature Gun, Adjustable Emissivity | Digital infrared temp gun for Engine, BBQ, Pizza, oven, candy, grilling, baking, HVAC, automotive

One of the consumer electronics options compared in this guide.

View on Amazon

Product Best for Key spec from the title
Backlit Cooking IR Gun Pizza oven and grill checks -58F to 932F, backlight
Etekcity 774 Griddle and HVAC work Adjustable emissivity, MAX display
TempPro TempScan Pizza oven and griddle Adjustable emissivity
Klein Tools IR1 Tradespeople Targeting laser, auto-hold
TempPro TempScan 2-in-1 Grilling with internal checks Meat probe plus infrared
Etekcity -58F to 1130F Very hot pizza ovens 1130F maximum
MAX/MIN Cooking IR Gun Tracking temperature swings -58 to 1112F, MAX and MIN
All-Purpose IR Gun Engine, candy, and baking jobs Adjustable emissivity

How to Choose

Temperature range for your actual job

A pizza oven can exceed 700 degrees Fahrenheit, so look for a maximum of 900 or higher. For baking, candy, and general kitchen work, a ceiling near 500 degrees is plenty. For HVAC vents, 100 to 200 degrees is typical, and a low-end limit near -58 degrees Fahrenheit covers freezers and cold lines. Remember that a wide range is not the same as accuracy: a gun rated to 1100 degrees may be less precise at the bottom of its scale, so pick the range that brackets the temperatures you will actually read, with some margin above them.

Emissivity and surface type

Emissivity is how well a surface radiates heat. Matte, dark surfaces read accurately at default settings; shiny metals like stainless pans and aluminum foil read low unless you adjust emissivity or add a strip of tape. Adjustable emissivity is the single most useful feature if you cook on griddles or cast iron. Most listings quote a fixed default near 0.95, which suits food, paint, and oxidized metal, so a gun without any adjustment is fine for a pizza stone but unreliable on a bare aluminum tray or a polished pot.

Distance, targeting, and holds

The spot being measured gets larger as you move away, so aim close for small items. A laser dot shows where you are pointing, not the exact area measured. MAX, MIN, and auto-hold modes help when the reading changes quickly or you are reading in a spot where the display is hard to see.

What to ignore and where budget guns cut corners

Do not rely on a laser to measure food internal temperature. Cheap guns vary in response time, backlight clarity, and calibration drift, and the title seldom says which. Skip models that promise body-temperature use unless the listing is clearly medical; these cooking and trade guns are not intended for it.

The 8 Best Options

Backlit Cooking IR Gun

A handheld, non-contact laser gun aimed at cooking, BBQ, and pizza oven checks, with a backlight and a stated range of -58 to 932 degrees Fahrenheit (-50 to 500 Celsius). The backlight helps when you are reading a dim patio grill after sunset, and the range covers most backyard cooking including a hot pizza stone. It is a sensible first gun for a household that wants to confirm a pan or stone is ready before food touches it.

  • Strength: a range up to 932F covers pizza ovens and grills.
  • Strength: the backlight makes the display readable in dim light.
  • Trade-off: the title does not mention adjustable emissivity.

Skip it if you cook on shiny stainless surfaces and need emissivity control.

Etekcity 774

This Etekcity gun targets cooking, pizza oven, griddle, BBQ, meat, HVAC, and engine jobs, with adjustable emissivity and a MAX display. That combination makes it flexible for the cook who also tinkers with the car or checks the furnace, and the emissivity control helps with shiny surfaces that fool simpler guns. The model number in the name makes it easy to tell apart from the higher-range Etekcity listing below.

  • Strength: adjustable emissivity improves reading on varied surfaces.
  • Strength: MAX display catches peak surface temperature.
  • Trade-off: the visible title does not state the top temperature.

Skip it if the maximum range is the deciding factor for your oven.

TempPro TempScan

A TempPro gun built for pizza oven, griddle, and HVAC use with adjustable emissivity, also marketed for cooking and barbecue. It sits in the middle of the pack: a specialty cooking brand, emissivity control, and a broad use list. For someone who flips between a flat-top griddle and a pizza steel, that mix of surfaces is exactly the situation the title describes.

  • Strength: emissivity control suits griddles and metal cookware.
  • Strength: broad use list covers kitchen and shop.
  • Trade-off: MAX/MIN and probe features are not stated.

Skip it if you need hold functions for tracking temperature changes.

Klein Tools IR1

Klein Tools is a trade brand, and this IR1 has a targeting laser, auto-hold, and a non-contact digital reading range that starts at -4 degrees Fahrenheit. It is the least cooking-oriented of the group, built for electricians and technicians who check panels, motors, and ducts. The auto-hold feature locks the number on screen so you can step back from a hot or awkward spot and read it safely.

  • Strength: auto-hold freezes the reading so you can look away from a hot surface.
  • Strength: trade-brand pedigree for field use.
  • Trade-off: the stated low range starts at -4F, narrower at the cold end than others.

Skip it if you mainly cook or need very low readings for freezers.

TempPro TempScan 2-in-1

The only combo in the group: an infrared gun plus a meat probe, described as an instant-read thermometer for grilling and non-contact IR for cooking. Because infrared measures only the surface, the probe fills the gap for checking doneness inside meat. A griller can read the grate with the gun, then drop the probe into a thick cut without reaching for a second device.

  • Strength: probe plus IR covers both surface and internal readings.
  • Strength: one tool for the grill and the pizza stone.
  • Trade-off: a dual-function tool is usually bulkier than a plain IR gun.

Skip it if you only need surface readings and prefer a slim, pocketable gun.

Etekcity -58F to 1130F

The highest stated ceiling here, 1130 degrees Fahrenheit, plus adjustable emissivity and a MAX display, for cooking, pizza oven, BBQ, meat, kitchen, reptile, and HVAC tasks. It is the one to choose when a wood-fired pizza oven pushes beyond the other guns’ range. The reptile mention hints that it also works for checking basking spots and enclosure surfaces.

  • Strength: 1130F maximum covers very hot ovens.
  • Strength: adjustable emissivity and a reptile-enclosure use case.
  • Trade-off: a higher range does not guarantee better accuracy near the extremes.

Skip it if a 500F ceiling is enough and you want something simpler.

MAX/MIN Cooking IR Gun

A -58 to 1112 degrees Fahrenheit gun with adjustable emissivity and both MAX and MIN readouts, for pizza, oven, and grill checks. MAX and MIN let you watch how far the surface swings during a session, handy when you are heating a stone or cooling a tray. It also suits anyone sweeping across a cooktop who wants the hottest and coolest patches without writing numbers down.

  • Strength: MAX and MIN tracking shows temperature swings.
  • Strength: 1112F range handles most pizza ovens.
  • Trade-off: no brand name in the title, so support details are unclear.

Skip it if you prefer a recognizable brand behind the product.

All-Purpose IR Gun

A laser gun with adjustable emissivity for engine, BBQ, pizza, oven, candy, grilling, baking, and HVAC jobs. It reads as a broad-use choice, helpful for someone who bakes on weekends and works under the hood on weekdays. The mention of candy work is a useful clue that it is meant for kitchen tasks where syrup or chocolate surfaces matter, not just grills.

  • Strength: wide use list covers kitchen, shop, and HVAC.
  • Strength: adjustable emissivity helps with metal surfaces.
  • Trade-off: the title gives no range or hold features.

Skip it if you need a stated maximum temperature before you buy.

Which One Fits Your Situation

A wood-fired pizza oven

The Etekcity -58F to 1130F offers the highest stated maximum, which keeps hot stone readings inside the range.

Cooking on griddles and cast iron

The TempPro TempScan and Etekcity 774 both list adjustable emissivity, which corrects for reflective metal.

Grilling and checking doneness

The TempPro TempScan 2-in-1 adds a probe for the internal reading that infrared cannot provide.

Electrical or HVAC work

The Klein Tools IR1 brings auto-hold and a targeting laser from a trade-focused brand, a better match for checking breaker panels, motors, and supply registers than for flipping burgers.

For a household that wants a single gun for candy, baking, and garage work, the All-Purpose IR Gun is the listing that names those jobs together, so it covers the kitchen counter and the engine bay with the same tool.

Common Mistakes

  • Using an infrared gun to judge whether meat is cooked inside.
  • Measuring shiny metal without adjusting emissivity.
  • Pointing from too far away and reading a bigger area than intended.
  • Buying for a pizza oven with a gun that tops out near 500 degrees.
  • Treating a cooking gun as a fever thermometer.

Related guides

Frequently Asked Questions

Can I use an infrared thermometer to check a fever?

No. These guns measure surfaces for cooking and trades, not body temperature. Use a thermometer designed for medical use, because cooking guns are not calibrated for human skin and their readings could be dangerously misleading.

Why do readings on stainless steel look wrong?

Shiny metal reflects infrared, so the reading comes out low. Adjust emissivity, or place a strip of matte tape on the surface and measure that.

What does MAX mode do?

It records the highest temperature seen during a scan. That helps when you sweep across a surface with hot and cool spots.

How far away should I hold it?

Closer is generally more accurate for small targets. The measured spot grows with distance, so move in when the item is small. If the reading seems off, check that nothing hot or cold is passing through the beam, and let the gun adjust to the room temperature for a few minutes after carrying it in from a cold garage.

H
Homespe Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
8 Best Infrared Thermometer under $150 (November 2026)Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Wedding Registry

Collect the home and kitchen items you want in one registry that guests can shop from.

Create a wedding registry
Subscribe & Save

Set up recurring deliveries of everyday items on eligible products. Terms and savings are set by Amazon.

Explore Subscribe & Save
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free

As an Amazon Associate we earn from qualifying purchases.