How to Clean Carpets at Home Step by Step

Carpeting is a top-rated flooring product than other residential flooring products, like- laminate, tile, wood, cork, bamboo, vinyl, stone). People love carpeting because of its softness and warmth. Besides, it requires less upkeep and maintenance than hard surface floors. Also, you don’t need to give much effort to clean it. Just vacuum frequently and deep clean occasionally (2-3 times a year) to keep your carpet looking fresh and new.

However, many people want to clean their carpets at home. But some people can’t wash their carpets at home properly. That’s why, here, we will discuss how to clean carpet at home by different cleaning methods.

How to Clean Carpets at Home?

At present, there are multiple carpet cleaning techniques available. You can easily clean your carpet at home by using the machine or without the machine.

Method: 1

Clean the Carpet by Using Baking Soda

Equipment

• Baking Soda
• Water
• Vacuum Cleaner
• Spray Bottle

Procedure

To clean your carpet at home, you can use baking soda. Bicarbonate of soda or Baking soda is a natural deodorizer. It is perfect for freshening up a rancid carpet. Before vacuuming, sprinkle baking soda liberally over the carpet. Then spray water all over the carpet, leave it for a few hours, and vacuum once dried. Odor or smell will also disappear.

Method: 2

Clean the Carpet by Using Vinegar

Equipment

• White Vinegar
• Water
• Vacuum Cleaner
• Spray Bottle

Procedure

You can use vinegar to clean your carpet. It helps to lift lingering stains as well as odors too. First, prepare a solution by combining 3- portions of water and 1-portion of white vinegar. Then spray it liberally over the carpet and allow it to sit for a few moments. Vacuum thoroughly and clean your carpet easily check here.

Method: 3

Clean the Carpet by Using Carpet Cleaner

Equipment

• Warm Water
• Carpet Cleaning Solution
• Carpet Washer

Preparation of the Carpet Cleaning Machine

If you are a first-time user of a carpet washer, read the instructions carefully and follow these. Rinse the tanks and then check the brush bar and filter are clear. If you discover any seeming issues, inspect the equipment’s manual.

Fill the Tank

To begin, fill the water tank on the carpet cleaner with warm water and a cleaning solution. Before filling the water tank on your carpet washer, the machine should be unplugged.

Carpet Cleaning

Start cleaning your carpet from the corner of the room for best results. To avoid any accidental issue, work your way back to the door. Move forwards and backward, slowly holding the trigger and spray the cleaning solution. Then relieve the trigger and pull the cleaner over the carpet. Repeat the back and forth movement 4-times in each section.

Dry the Carpet

Open all of the windows and doors of the room to let fresh air in and help your carpet dry faster. Furthermore, if it is too cold, turn on the central heating and leave it on for a few hours to expedite the drying rate.

Method: 4

Cleaning Carpet without a Machine

Equipment

• Carpet Shampoo
• Baking Soda
• Towels
• Water
• Spray Bottle
• Carpet Brush

Procedure

• Firstly, sprinkle baking soda liberally throughout the carpet. Then vacuum thoroughly to clear away debris.
• Then make up a solution by using carpet shampoo (2 drops) and warm water and pour into a clean spray bottle. After that, spray over the carpet.
• To dispel any trapped dirt, brush your carpet with a carpet brush.
• Blot the area with towels to dispel moisture as much as possible.
• After that, spray fresh water in the same area with the spray bottle.
• To lift the excess moisture, use another dry towel and finish cleaning.

Method: 5

Deep Clean the Carpet

Equipment

• Salt
• White Vinegar
• Borax
• Carpet Steam Cleaner
• Vacuum cleaner
• Hot water

Procedure

• If you have never vacuumed before, then go in three different directions. Get the dust, particles, and hair out of the pile.
• Mix 1/4 cup borax, 1/4 cup white vinegar, and 1/4 cup salt and make a paste. Then apply the paste to deep spots of the carpet and leave it for several hours and vacuum it away.
• After that, start up the steam cleaner. You will need to rent a new machine for increasing efficiency.
• Fill the machine with hot water. Hot water helps to get the grime out of the carpet.
• If you have highly soiled carpeting, you will need intense cleaning. For this, you can add white vinegar (1 cup) to 2.5 gallons of water.
• Most of the machines have two modes. First, press a button and then release the hot water. Second, release the button, and then it sucks the water back up. Soak the carpet and then walk over it 3 – 4 times to speed up the drying process.
• Steam clean your carpet a second time.
• Let the carpets dry properly, and then you can use them.

Method: 6

Dry Clean the Carpet without a Machine

Final Verdict

Here, we have described 6-ways to clean the carpet. You can easily clean your carpet at home by following any of our described cleaning methods. So keep following our instructions to get clean carpet flooring. We hope this article will assist you in understanding the cleaning process of the carpet.